Video 22: Making a Bias Binding

When you cut bias binding, what you’re doing is cutting the fabric diagonally. It’s easy to do this if you know how to fold the fabric. Bias binding looks great when using fabrics with stripes. The binding will also wear better because of the give in the fabric.

When using bias binding remember to buy more fabric than what the pattern calls for, I usually will buy 5/8 to 1 yard of fabric per quilt.

Video 21: Basting a Quilt

When basting a quilt your backing and batting should be 6 to 8 inches bigger than your top. Center your top, leaving the extra fabric on the outer edges. This way if you have some slippage, the back and batting will still fit. I like to tape the backing down with painter’s tape or masking tape, this will keep your backing taunt. Pins, pins and more pins. Start with pinning down and across the center of your quilt, then pin diagonally, use your fist to ensure you have enough distance between each pin. Don’t skimp on pinning, this will keep your top, batting, and backing in place.

Video 20: Chain Piecing

Chain piecing allows you to save thread and sew your units quickly. Start with a small piece of fabric and add the units one by one. You don’t want to overlap them, feed one unit at a time leaving two stitches in between each unit. Once your units are sewn, clip between the units and you are now ready to move to the next step in your block.

Stiletto: a pointy stick used to help feed fabric and helps keep seams in place.

Click Here To Read The Transcript

Hey, have you noticed we’re on iTunes? Be sure to rate us and/or write a short review! Don’t forget to help produce our videos, we need your support to keep them coming!

Want to help “produce” our videos? Here’s how you can help:

  • Become an Associate Producer by donating $5.00.
  • Become an Associate Executive Producer by donating $10 or more.
  • Whoever donates the most for any given video will become the Executive Producer and will get a special mention and a free gift!

Or, if you don’t want to use PayPal, just send us a check to Overall Quilter, PO Box 2233, Indian Trail, NC 28079.

All producers will be credited for your donations in the upcoming video’s credits if you donate by 12 midnight Saturdays (since we usually record our videos on Sundays). It’s an amazing feeling when I get an email that someone donated! It makes my day!

Video 19: Half-Square Triangles

Working with triangles can be tricky. You have to be careful not to stretch the triangles or you’ll have a distorted square.

In this video, you’ll be making eight 3″ finished units. Using a Quick Quarter Ruler will ensure you have straight diagonal lines. Once both sides of the two diagonal lines are sewn, you are ready to cut across, up, down and diagonally separating the units.

Now use your 3 1/2″ square to trim down the unit, run the diagonal line of the ruler down the diagonal seam of the square. A finished unit starts out being 1/2″ larger. so when we say 3″ finished, we start with 3 1/2″ and once sewn into the block the seams take up the 1/2″.

Video 16: Paper Piecing

I learned how to paper piece using Peggy Martin’s book “Quick Strip Paper Piecing”. This book is full of beautiful stars and is easy to follow. I’ve also learned that using the “Add-A-Quarter Ruler” really makes it easy to leave exactly 1/4″ seam, making it easy to lay the next fabric in place. Paper piecing allows you to have perfect points and meet those tricky seams by stitching exactly on the lines.

Follow the rule: Sew, Press, Cut and you will be on your way to beautiful blocks.

Video 15: Quilt Hanging Sleeve

Wow … what a busy week! I had to drive to Florida to help Mom and Dad last week and this week we’re getting ready for the Cabarrus Show on Friday and Saturday.

But we did have time to film our next video …

How to put a sleeve on the back of your quilt so you can hang it!

I know it’s a long title but Marc insisted on shortening it up: “Quilt Hanging Sleeve”

Normally I use a 10″ width of quilt size for my sleeve, unless its a really small quilt or a wall hanging then you can go with a 6″ sleeve. It all depends on how big the hanging rod is.

Nothing magical here, just top stitch the sides and sew the sleeve (raw edges) to the top of the quilt, then hand stitch the bottom part just like you would your binding. I sew the binding and the sleeve at the same time. If you’re having problems with your binding, check out my “dreaded binding” video.